Carbtune Accessories

Carbtune II TM ................ Accessories

Secure Order Carbtune Details Prices Magazine Reviews Testimonials Operation Carburetor Balancing Accessories Carbtune Home History FAQs Windscreen Earplugs

If parts get lost or damaged you can buy replacements.

Adapter kits Nitrile hoses Restricters B.S. Fuel & heat resistant hoses Remote extension kit Needle kits

Adapter Kits.

5mm and 6mm brass adapters to screw into inlets and connect any vacuum gauge hoses. Includes nitrile sealing washers.

2 adapters £4 UK P+P free.
Worldwide add £1

4 adapters £6

8 adapters (4x5mm + 4x6mm) £10

Prices available for larger quantities

Nitrile hoses.

Comes in 1 metre lengths for connecting gauges to carburettors.
Will work with any gauges. 5mm id x 8mm od.
This is not a fuel hose and should not be used for a fuel supply.

2 x 1 metre lengths £3 £2 P+P
UK and Worldwide

4 x 1 metre lengths £6

Prices available for larger quantities

Restricters.

Standard restricters for Carbtune II
(will probably work with dial gauges as well)

Enough to make 4 restricters £2 Post free
UK and worldwide

Mercury Carbtune I

Enough for 4 very strong restricters £4 Post free
UK and worldwide

British Standard fuel and heat resistant hose.

5mm id x 10mm od.

Including P+P inside UK £4.00/ metre

Rest of World add £1/mtr P+P

Remote Extension Kit.

A new product to use with Carbtune I or II or any vacuum gauges. It consists of four brass adapters, long-term British Standard fuel and heat resistant hose (1.2 mtr 4-way kit), connectors and end caps.
Its makes connecting vacuum gauges to your bike very easy.
On quite a lot of bikes connecting adapters is very awkward (on some YZF750s you have to remove the carburettors to connect the adapters).
With the extension kit you put the adapters permanently into your bikes inlets and connect the rubber hoses to them. Connectors are pushed into the other ends of the hoses to accept the rubber end caps. The ends of the hoses come out at any convenient place you want.
When you want to check your carburettors all you have to do is remove the accessible rubber end caps from the hose connectors and push your gauge hoses onto the connectors. Start your engine and take a reading. Very simple, very quick.

Four carburettor kit £10 £2 P+P
UK and Rest of World

Two carburettor kit £8 £2 P+P
UK and Rest of World
(P+P free if ordered with or within one month of purchase of Carbtune II)

Needle kits.

Got a bike that doesn't have take-off points or the take-off points are too awkward to get to?
Then you can use a hypodermic needle to connect the gauges as long as you have rubber inlets between the carburettors and cylinder head.
All you do is connect the vacuum gauge hoses to the fitting on the needles and then push the needles through the inlet rubbers to take readings. Self seals when it comes out. As used by Kawasaki and detailed in genuine Honda service manuals.

Minimum 4 needles £6 Post free UK
£1 P+P worldwide

Adapter kits Nitrile hoses Restricters B.S. Fuel & heat resistant hoses Remote extension kit Needle kits

Secure Order Carbtune Details Prices Magazine Reviews Testimonials Operation Carburetor Balancing Accessories Carbtune Home History FAQs Windscreen Earplugs

Adapter Kits.
5mm and 6mm brass adapters to screw into inlets and connect any vacuum gauge hoses. Includes nitrile sealing washers.
2 adapters	£4	UK P+P free. Worldwide add £1
4 adapters	£6
8 adapters (4x5mm + 4x6mm)	£10
Prices available for larger quantities

Nitrile hoses.
Comes in 1 metre lengths for connecting gauges to carburettors. Will work with any gauges. 5mm id x 8mm od. This is not a fuel hose and should not be used for a fuel supply.
2 x 1 metre lengths	£3	£2 P+P UK and Worldwide
4 x 1 metre lengths	£6
Prices available for larger quantities

Restricters.
Standard restricters for Carbtune II (will probably work with dial gauges as well)
Enough to make 4 restricters	£2	Post free UK and worldwide
Mercury Carbtune I
Enough for 4 very strong restricters	£4	Post free UK and worldwide

British Standard fuel and heat resistant hose.
5mm id x 10mm od.
Including P+P inside UK	£4.00/ metre
Rest of World	add £1/mtr P+P

Remote Extension Kit.
A new product to use with Carbtune I or II or any vacuum gauges. It consists of four brass adapters, long-term British Standard fuel and heat resistant hose (1.2 mtr 4-way kit), connectors and end caps. Its makes connecting vacuum gauges to your bike very easy. On quite a lot of bikes connecting adapters is very awkward (on some YZF750s you have to remove the carburettors to connect the adapters). With the extension kit you put the adapters permanently into your bikes inlets and connect the rubber hoses to them. Connectors are pushed into the other ends of the hoses to accept the rubber end caps. The ends of the hoses come out at any convenient place you want. When you want to check your carburettors all you have to do is remove the accessible rubber end caps from the hose connectors and push your gauge hoses onto the connectors. Start your engine and take a reading. Very simple, very quick.
Four carburettor kit	£10	£2 P+P UK and Rest of World
Two carburettor kit	£8	£2 P+P UK and Rest of World (P+P free if ordered with or within one month of purchase of Carbtune II)

Needle kits.
Got a bike that doesn't have take-off points or the take-off points are too awkward to get to? Then you can use a hypodermic needle to connect the gauges as long as you have rubber inlets between the carburettors and cylinder head. All you do is connect the vacuum gauge hoses to the fitting on the needles and then push the needles through the inlet rubbers to take readings. Self seals when it comes out. As used by Kawasaki and detailed in genuine Honda service manuals.
Minimum 4 needles	£6	Post free UK £1 P+P worldwide